Câu 10: 156-21580: Check Point Certified Security Administrator (CCSA R80)
When using GAiA, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the old MAC address should be active. How do you configure this change?
Nội dung câu hỏi
When using GAiA, it might be necessary to temporarily change the MAC address of the interface eth 0 to 00:0C:29:12:34:56. After restarting the network the old MAC address should be active. How do you configure this change?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. As expert user, issue these commands: # IP link set eth0 down # IP link set eth0 addr 00:0C:29:12:34:56 # IP link set eth0 up
- B. Edit the file /etc/sysconfig/netconf.C and put the new MAC address in the field (conf :(conns :(conn :hwaddr (ג€00:0C:29:12:34:56ג€)
- C. As expert user, issue the command: # IP link set eth0 addr 00:0C:29:12:34:56 — đáp án hiện tại
- D. Open the WebUI, select Network > Connections > eth0. Place the new MAC address in the field Physical Address, and press Apply to save the settings.
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.
Chưa có bình luận. Mở giao diện tương tác để bắt đầu thảo luận.