Câu 42: 300-615: Troubleshooting Cisco Data Center Infrastructure (DCIT)
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a “No Signal” message from the vKVM and physical video connection. Which set of steps resolves the issue?
Nội dung câu hỏi
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a “No Signal” message from the vKVM and physical video connection. Which set of steps resolves the issue?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. 1. Disconnect the power cord.2. Confirm that all cards are properly seated.3. Connect the power cord and power on the server.
- B. 1. Power off the server and disconnect the power cord.2. Confirm that all cards are properly seated.3. Connect the power cord and power on the server.
- C. 1. Disconnect the power cord.2. Confirm that all cards are properly seated.3. Connect the power cord.
- D. 1. Power off the server and disconnect the power cord.2. Confirm that all cards are available.3. Connect the power cord and power on the server. — đáp án hiện tại
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.
Chưa có bình luận. Mở giao diện tương tác để bắt đầu thảo luận.