Câu 112: 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Refer to the exhibit. Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link?

1. A. Router 1(config)# ip cef distributed Router 1(config)# mpls ldp session protection global Router 2(config)# ip cef distributed Router 2(config)# mpls ldp session protection global
2. B. Router 1(config)# ip cef distributed Router 1(config)# interface gigabitethernet 0/0 Router 1(config-if)# ip address 192.168.1.1 255.255.255.0 Router 1(config)# mpls ldp session protection Router 2(config)# interface gigabitethernet 0/0 Router 2(config-if)# ip address 192.168.1.2 255.255.255.0 Router 2(config)# mpls ldp session protection
3. C. Router 1(config)# ip cef distributed Router 1(config)# interface gigabitethernet 0/0 Router 1(config-if)# ip address 192.168.1.1 255.255.255.255 Router 1(config-if)# exit Router 1(config)# mpls ldp session protection Router 2(config)# ip cef distributed Router 2(config)# interface gigabitethernet 0/0 Router 2(config-if)# ip address 192.168.1.2 255.255.255.255 Router 2(config-if)# exit Router 2(config)# mpls ldp session protection
4. D. Router 1(config)# ip cef distributed Router 1(config)# interface gigabitethernet 0/0 Router 1(config-if)# ip address 192.168.1.1 255.255.255.0 Router 1(config-if)# mpls label protocol ldp Router 1(config-if)# mpls ip Router 1(config-if)# exit Router 1(config)# mpls ldp session protection Router 2(config)# ip cef distributed Router 2(config)# interface gigabitethernet 0/0 Router 2(config-if)# ip address 192.168.1.2 255.255.255.0 Router 2(config-if)# mpls label protocol ldp Router 2(config-if)# mpls ip Router 2(config-if)# exit Router 2(config)# mpls ldp session protection — đáp án hiện tại