Câu 118: 350-601: Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth1/2 interfaces for both switches must be advertised viaOSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interfaces Eth1/1 on SW1 and Eth1/1…
Nội dung câu hỏi
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth1/2 interfaces for both switches must be advertised viaOSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interfaces Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
-
A. Lựa chọn A bằng hình ảnh
-
B. Lựa chọn B bằng hình ảnh
-
C. Lựa chọn C bằng hình ảnh — đáp án hiện tại
-
D. Lựa chọn D bằng hình ảnh
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.