Câu 153: 350-801: Implementing Cisco Collaboration Core Technologies (CLCOR)
An administrator is integrating a Cisco Unity Express module to a Cisco UCME system. A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal. The dial-peer is configured as follows: dial-peer voice 4100 voip destination-pattern 41.. session protocol sipv2 session tar…
Nội dung câu hỏi
An administrator is integrating a Cisco Unity Express module to a Cisco UCME system. A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal. The dial-peer is configured as follows: dial-peer voice 4100 voip destination-pattern 41.. session protocol sipv2 session target ipv4:10.1.10.1 dtmf-relay sip-notify no vadHow is this issue resolved?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. The dial-peer needs to be reconfigured to support the G.711 voice codec. — đáp án hiện tại
- B. The destination pattern needs to be changed to match the dialed number of 4100.
- C. The dial-peer needs to be reconfigured to support vad.
- D. The dial-peer needs to be reconfigured to support H.323 instead of SIP.
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.