Câu 136: 350-801: Implementing Cisco Collaboration Core Technologies (CLCOR)

Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

1. A. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061: HTTPS: TCP 8443; XMPP: TCP 5222; Media: UDP 36002 to 59999. — đáp án hiện tại
2. B. The internal firewall must allow these inbound and outbound connections between Expressway-׀¡ and Expressway-E: SIP: HTTPS (tunneled over SSH between ׀¡ and E): TCP 2222: TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance); XMPP: TCP 7400.
3. C. Do not use a shared address for Expressway-E and Expressway-׀¡, as the firewall cannot distinguish between them. If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway-׀¡ does not resolve the same traffic IP address. Shared NAT is not supported.
4. D. The traversal zone on Expressway-׀¡ points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface.