Câu 40: 642-883: Deploying Cisco Service Provider Network Routing (SPROUTE)
Refer to the BGP and route map configurations exhibit. When the "setas" route map is applied to the 10.1.1.2 neighbor, the 10.1.1.2 neighbor is not able to receive all the required BGP routes from this router. What could be the problem?
Nội dung câu hỏi
Refer to the BGP and route map configurations exhibit. When the "setas" route map is applied to the 10.1.1.2 neighbor, the 10.1.1.2 neighbor is not able to receive all the required BGP routes from this router. What could be the problem?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. The BGP session was cleared using the clear ip bgp command after the route map was applied.
- B. The test1 or test2 prefix-list is misconfigured.
- C. There is no pass action configured within the route map.
- D. The route map is missing the route-map setas permit 30 statement. — đáp án hiện tại
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.
Chưa có bình luận. Mở giao diện tương tác để bắt đầu thảo luận.