Câu 59: N10-006: CompTIA Network+
An administrator's network has OSPF for the internal routing protocol and has two interfaces that continue to flap. The administrator reviews the following output:Fast ethernet 0 is up, line protocol is upInt ip address is 10.20.130.5/25MTU 1500 bytes, BW10000 kbit, DLY 100 usecReliability 255/255, Tx load 1/255, Rx l…
Nội dung câu hỏi
An administrator's network has OSPF for the internal routing protocol and has two interfaces that continue to flap. The administrator reviews the following output:Fast ethernet 0 is up, line protocol is upInt ip address is 10.20.130.5/25MTU 1500 bytes, BW10000 kbit, DLY 100 usecReliability 255/255, Tx load 1/255, Rx load 1/255Encapsulation ospf, loopback not setKeep alive 10 -Full duplex, 100Mb/s, 100Base Tx/FxReceived 1052993 broadcasts -1258 input errors983881 packet output, 768588 bytes1747 output errors, 0 collisions, 423 resetsWhich of the following problems would cause the interface flap?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. Wrong IP address
- B. Loopback not set
- C. Bad wire
- D. Incorrect encapsulation
- E. Duplex mismatch — đáp án hiện tại
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.