Câu 41: N10-008: CompTIA Network+

SIMULATION -You have been tasked with setting up a wireless network in an office. The network will consist of 3 Access Points and a single switch. The network must meet the following parameters: ✑ The SSIDs need to be configured as CorpNet with a key of S3cr3t! ✑ The wireless signals should not interfere with each other ✑ The subnet the Access Points and switch are on should only support 30 devices maximum ✑ The Access Points should be configured to only support TKIP clients at a maximum speedINSTRUCTONS -Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements. If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

1. A. AP1 192.168.1.3 /27 Gateway: 192.168.1.1 Mode: G SSD: CorpNet *** This is Case Sensitive, Whatever is on the test for SSID thats how it should be ** Key: S3cr3t! Security Settings: WPA Speed: Auto/Auto AP2 192.168.1.4 /27 Gateway: 192.168.1.1 Mode: G SSD: CorpNet *** This is Case Sensitive, Whatever is on the test for SSID thats how it should be ** Key: S3cr3t! Security Settings: WPA Speed: Auto/Auto AP3 192.168.1.5 /27 Gateway: 192.168.1.1 Mode: G SSD: CorpNet *** This is Case Sensitive, Whatever is on the test for SSID thats how it should be ** Key: S3cr3t! Security Settings: WPA Speed: Auto/Auto 192.168.1.2 Is your switch. — đáp án hiện tại