Câu 4: NSE7: NSE7 Enterprise Firewall - FortiOS 5.4
Examine the following partial outputs from two routing debug commands; then answer the question below.# get router info routing-table databases 0.0.0.0/0 [20/0] via 10.200.2.254, port2, [10/0] s *> 0.0.0.0/0 [10/0] via 10.200.1.254, port1# get router info routing-table alls* 0.0.0.0/0 [10/0] via 10.200.1.254, port1Why…
Nội dung câu hỏi
Examine the following partial outputs from two routing debug commands; then answer the question below.# get router info routing-table databases 0.0.0.0/0 [20/0] via 10.200.2.254, port2, [10/0] s *> 0.0.0.0/0 [10/0] via 10.200.1.254, port1# get router info routing-table alls* 0.0.0.0/0 [10/0] via 10.200.1.254, port1Why the default route using port2 is not displayed in the output of the second command?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. It has a lower priority than the default route using port1.
- B. It has a higher priority than the default route using port1.
- C. It has a higher distance than the default route using port1. — đáp án hiện tại
- D. It is disabled in the FortiGate configuration.
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.