Question 17: HPE7-A05: HPE Network Data Center Professional

Refer to the exhibit. You are configuring the above topology with HPE Aruba Networking Fabric Composer (AFC). This topology should have VSX switch pairs with an overlay (VXLAN EVPN) and underlay (OSPF, BGP) configuration. What should be done to achieve the above configuration?

1. A. discover fabrics, assign switches to fabric, configure NTP, configure DNS, configure VSX, configure L2 leaf-spine, configure underlay, configure overlay, configure EVPN
2. B. discover switches, add 1 fabric, assign switches to fabric, configure NTP, configure DNS, configure VSX, configure L3 leaf-spine, configure underlay, configure overlay, configure EVPN — đáp án hiện tại
3. C. discover switches, add 2 fabrics, assign switches to fabrics, configure NTP, configure DNS, configure VSX, configure L3 leaf-spine, configure OSPF, configure BGP, configure EVPN
4. D. discover switches, add 2 fabrics, assign switches to fabrics, configure NTP, configure DNS, configure VSX, configure L3 leaf-spine, configure underlay, configure overlay, configure EVPN

Giải thích

Answer researched independently against supporting documentation; not a published source answer key. Derived answer from vendor documentation: Exhibit inspected: one spine-leaf fabric with two VSX leaf pairs. Guided setup discovers switches, creates one fabric, assigns roles and configures Layer 3 underlay before EVPN overlay. References: https://arubanetworking.hpe.com/techdocs/VSG/docs/050-dc-deploy/esp-dc-deploy-120-fabric-deploy/