Question 33: HPE7-A05: HPE Network Data Center Professional

Refer to the exhibit. You configure a site with the following topology:2 spine switches2 leaf switches each having a VSX switch-pairspine switches are not interconnectedeach leaf switch has a redundant connection to the spinesOSPF and BGP are used as routing protocolsEVPN VXLAN will be deployed as overlay1 OSPF area will be usedThe following configuration will be used for BGP connectivity: Which address family should be used here?

1. A. address-family l3vpn evpn
2. B. address-family ipv4 unicast
3. C. address-family l2vpn evpn — đáp án hiện tại
4. D. address-family ip4 point-to-point

Giải thích

Answer researched independently against supporting documentation; not a published source answer key. Derived answer from vendor documentation: Both exhibits inspected. The BGP EVPN control plane uses address-family l2vpn evpn. References: https://arubanetworking.hpe.com/techdocs/VSG/docs/050-dc-deploy/esp-dc-deploy-120-fabric-deploy/ https://arubanetworking.hpe.com/techdocs/AOS-CX/10.13/HTML/vxlan/Content/Chp_EVPN/evp-vsx-sup-10.htm