Câu 25: H12-725-V4-0: HCIP-Security V4.0
As shown in the figure, the two firewalls woek in active/standby mode. The HRP status on firewall A is as follows:HRP_M[FW_A] display hrp state -Role: active, peer: unknown -Running priority: 45000, peer: 45000Backup channel usage: 0.00%Stable time: 0 days. 5 hours, 49 minutesWhich of the following is not a possible c…
Nội dung câu hỏi
As shown in the figure, the two firewalls woek in active/standby mode. The HRP status on firewall A is as follows:HRP_M[FW_A] display hrp state -Role: active, peer: unknown -Running priority: 45000, peer: 45000Backup channel usage: 0.00%Stable time: 0 days. 5 hours, 49 minutesWhich of the following is not a possible cause?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. The hot standby function is not enabled on the peer device.
- B. All service interfaces on firewall B are faulty. — đáp án hiện tại
- C. No heartbeat interface is specified on the peer device.
- D. No heartbeat link is not added to a security zone.
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.