Question 53: H12-811-V2-0: HCIA-Datacom V2.0
On the OSPF network shown in the figure, all IP addresses can communicate with each other. Then the following configurations are added on R1:[R1] acl 3000[R1-acl4-advance-3000] rule deny ip source 10.0.1.1 0.0.0.0[R1-acl4-advance-3000] rule deny ip source 10.1.1.1 0.0.0.0[R1-acl4-advance-3000] rule deny ip source 10.3…
Nội dung câu hỏi
On the OSPF network shown in the figure, all IP addresses can communicate with each other. Then the following configurations are added on R1:[R1] acl 3000[R1-acl4-advance-3000] rule deny ip source 10.0.1.1 0.0.0.0[R1-acl4-advance-3000] rule deny ip source 10.1.1.1 0.0.0.0[R1-acl4-advance-3000] rule deny ip source 10.3.1.1 0.0.0.0[R1-acl4-advance-3000] rule permit ip[R1-acl4-advance-3000] quit[R1] traffic classifier test[R1-classifier-test] if-match acl 3000[R1-classifier-test] quit[R1] traffic behavior test[R1-behavior-test] permit[R1-behavior-test] quit[R1] traffic policy test[R1-trafficpolicy-test] classifier test behavior test[R1-trafficpolicy-test] quit[R1] interface GE 0/0/1[R1-GE0/0/1] traffic-policy test inbound[R1-GE0/0/1] quitWhich IP address of S1 can successfully ping 10.0.23.3?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. 10.1.1.1
- B. 10.0.1.1
- C. 10.3.1.1
- D. 10.2.1.1 — đáp án hiện tại
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.