Câu 10: C2150-620: IBM Security Network Protection (XGS) V5.3.2 System Administration
The System Administrator of an oil and gas company has an XGS appliance deployed in the network below: The appliance was working in Inline simulation mode and suddenly there was a power failure on the switch which causes link 1.2 on XGS to go down, However, port 1.1 on XGS remains up and hence the firewall keeps on se…
Nội dung câu hỏi
The System Administrator of an oil and gas company has an XGS appliance deployed in the network below: The appliance was working in Inline simulation mode and suddenly there was a power failure on the switch which causes link 1.2 on XGS to go down, However, port 1.1 on XGS remains up and hence the firewall keeps on sending the traffic to XGS appliance without realizing failure in the path. Which setting should be corrected in the Protection Interface policy to avoid this behavior?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. Ensure that Propagate link is set to No.
- B. Ensure that Propagate link is set to Yes.
- C. Ensure that hardware bypass mode is set to Fail Open.
- D. Ensure that hardware bypass mode is set to Fail Closed. — đáp án hiện tại
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.