Câu 64: JN0-360: Juniper Networks Certified Internet Specialist SP (JNCIS-SP)
You are configuring OSPF on a Junos device; however, you have not configured a router ID. What is the default behavior in this situation?
Nội dung câu hỏi
You are configuring OSPF on a Junos device; however, you have not configured a router ID. What is the default behavior in this situation?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. If the loopback is configured with a 127/8 address, it will be used.
- B. If the loopback is not configured, it will use the interface with the highest IP address.
- C. If the loopback is configured and does not have a usable address, the IP address associated with the first hardware interface is used. — đáp án hiện tại
- D. If you configure a dedicated management address and include that interface in OSPF, it will be used as the router ID.
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.
Chưa có bình luận. Mở giao diện tương tác để bắt đầu thảo luận.