Câu 6: 3V0-25.25: Advanced VMware Cloud Foundation 9.0 Networking

An administrator is troubleshooting why workloads in NSX cannot reach the external network 10.100.0.0/16. The Tier-0 Gateway is in Active/Active mode and has the following configuration:Uplink-1 (VLAN 100): 192.168.100.0/24 → router R1 at 192.168.100.1Uplink-2 (VLAN 101): 192.168.101.0/24 → router R2 at 192.168.101.1A static route for 10.100.0.0/16 was added with both next-hops (192.168.100.1 and 192.168.101.1)The Scope of this route is set to Uplink-1Symptoms:Virtual Machines (VMs) cannot reach 10.100.0.0/16Traceroute from the VM stops at the Tier-0 gateway with "Destination Net Unreachable"Pings from the Edge nodes to both 192.168.100.1 and 192.168.101.1 are successWhat explains why workloads in NSX cannot reach the external network?

1. A. The physical routers are missing return routes.
2. B. The next-hops should have been configured as the Tier-0's own uplink IPs instead of the routers IPs.
3. C. Static routes do not support Equal Cost Multi-Pathing (ECMP) in NSX.
4. D. The static route Scope is set to only one uplink interface, but the next-hops are on two different VLANs. — đáp án hiện tại