Question 5: 300-110: Designing Cisco Wireless Networks (WLSD)
An engineer is designing a mesh wireless network. The network must fulfill these requirements: bridge mode APs must be usedWPA2-PSK -minimize wireless traffic tunneled to the WLC Which configuration must be used?
Nội dung câu hỏi
An engineer is designing a mesh wireless network. The network must fulfill these requirements: bridge mode APs must be usedWPA2-PSK -minimize wireless traffic tunneled to the WLC Which configuration must be used?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. FlexConnect
- B. Flex + Bridge — đáp án hiện tại
- C. bridge RAP
- D. bridge MAP
Answer researched independently against supporting documentation; not a published source answer key. Derived technical reasoning from cited primary documentation; no recovered public answer key. Flex+Bridge combines mesh bridge access-point operation with locally switched FlexConnect client traffic. References: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/m_flexconnect_overview.html
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.