Question 6: 300-110: Designing Cisco Wireless Networks (WLSD)
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which co…
Nội dung câu hỏi
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
Các lựa chọn
Đáp án được giữ gọn theo nhãn A, B, C, D trong phần bình chọn tương tác.
- A. C9800# chassis redundancy ha-interface local-ip remoteip
- B. C9800 (config) # management gateway-failover enable
- C. C9800 (config) # ip default-gateway
- D. C9800# wireless mobility mac-address — đáp án hiện tại
Answer researched independently against supporting documentation; not a published source answer key. Derived technical reasoning from cited primary documentation; no recovered public answer key. Cisco SSO deployment guidance requires an explicitly configured wireless mobility MAC so tunnels survive switchover. References: https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/9800/17-6/deployment-guide/c9800-ha-sso-deployment-guide-rel-17-6.pdf
Cộng đồng
0 bình luận công khai. Tên thành viên được ẩn một phần.